Note that most projected UTM (Universal Transverse Mercator) coordinate systems are based on the WGS84 geodetic coordinate system. Figure out which system you're using and then establish that component. It is a geodetic system with geocentric or geodetic coordinates based on the EGM96 geoid, the reference ellipsoid IAG GRS80, and the original meridian is the Greenwich meridian. ![]() Bu it really depends on who the manufacturer of the machine is and what work coordinate system methodology they're using, but it doesn't really matter. Other machines might use, like, a P position, so it would be, like, a G54-P100, for instance. txt file used in earlier versions of Mastercam is no longer used. ![]() pst file also stores the post text and miscellaneous values, so that the. Now different machines use different systems, like a Fadal, for instance, might use an E value, like E1234 and so on. This not only helps me identify better where the coordinate system is, but also the actual size of the stock were starting with. What is MD and CD 3 Each control definition is linked to a specific post processor. zero coincides and aligns with the coordinate system built in Mastercam. So most the time on most machines you can use a G54 or G55, 56 and so on, positioned to tell the machine where this component is inside of the machine. Three CAM software, Pro/MFG, Mastercam, and CAMWorks are employed for this. ![]() Last week, at the SolidWorks User Group in Barrie, John White, the owner and president of White-Line Machine &Tool talked about this issue and asked me if. All right, now that we've added our part into our assembly, we're ready to start doing the machine operations, but before we do that we have to establish our work coordinate system, and that's going to be where we're going to set the origin of this part and the relationship to the machine home position. The reason fo this extra work is the fact that the Up direction in SolidWorks is by default being defined by the Y axis, while in most CAM programs is following the Z-axis. Directional input refers by default to the global coordinate system (X, Y, and Z), which is based on Plane1 with its origin located at the Origin of the part or assembly.
0 Comments
Leave a Reply. |